The main function of the voltage
arresters is to save the objects or building from lighting. This is done by clearing
way for the current to go to the ground as fast as possible .This arrangement
is done by using voltage and lighting arresters to the grounded robs .The
voltage surge is generated by the lighting near home or it can also be
generated by the cloud to cloud lighting near or over home.
The first step, which everybody should do,
is to create excellent system for grounding of all household electrical system.
Sometimes the single metallic rod may not be adequate. The heavy voltage surge
cannot be handled by single metallic rod.
By connecting more than one rod to the ground, one can easily take the
voltage surge to the ground. All these rods must have solid copper wires
wielded on them. This solid copper wire is taken from the grounding bar inside
the electrical panel and ends at the last rod connected on the ground. These
grounding rods are at least ten feet apart from each other. These rods must be
put into the soil which is very good conductor of the electricity. Moisture
laden soil is generally good conductor of the soil. The soil with sand, rocks
and gravels are not good conductor of soil. They offer resistance. The
resistance range should be between 10 – 30 ohms. The lower resistance readings
are always better.
Installing lighting arrester Lightning Arresters
Manufacturers in Delhi inside the electric c service panels is the
second method of grounding voltage surge. The job of the arrester is effective
only when there are grounding robs. These light arresters can very effective in
cutting large voltage surges which travel in power lines. The arrester cannot
do the job, if there are no enough rods in the ground or grounding wires. The
arresters must be able to send the voltage surge into ground fast. Every
circuit makers installs one into their panels. The installation of arresters
can also be done by the householder who knows how to install in high voltage
panel. But preferable an experienced
electrician should be called for the service.
The voltage surge Porcelain
insulators manufacturers in Delhi can also come through phone lines, so
there are devices to protect the phones. The surge can also enter the computer
system through telephone lines. So this line should also be protected. The
telephone grounding lines have to be tied to the upgraded grounding electrical system.
No comments:
Post a Comment